■Soldering Condition with iron
Pre-heating (60 to 80°C, 10 sec. min)
|
Component Part
|
Temperature (°C)
|
Time (sec. max.)
|
|
①
|
Electrode
|
320 to 350
|
0.5
|
|
②
|
Metal Plate
|
410 to 450
|
3.0
|
■ Position
The farthest position from the center of the Piezoelectric Diaphragm is recommended, because the soldering point works as a load that restricts its oscillation.
The lead wire should also be as fine as possible. (Ex: AWG32).
Related FAQs
Most people who viewed this page also referred to the following pages.
Q.
Are there any points to be aware of handling diaphragm with lead wires?