Base Metal Electrode CERALOCK | Ceramic Resonators (CERALOCK)

Features

Since precious metals (Palladium) are not used, a long-term stable supply is possible.
The electrical characteristics and environmental resistances are equivalent to previous products.
The same land pattern as previous products allow the component to be replaced without changing the design of a board.
- *Except for some series.

Series applicable for replacement

Applications	Frequency (MHz)	Tolerance*1 Type	Series		Reference Link
Applications	Frequency (MHz)	Tolerance*1 Type	Previous Products	Base Metal Electrode products	Reference Link
Automotive	4.000 - 7.999	Standard	CSTCR_G_B ^*2		Part No. conversion table
	4.000 - 7.999	Tight	CSTCR_G_C	CSTNR_G_C
	8.000 - 13.999	Standard	CSTCE_G_A	CSTNE_G_A
	8.000 - 13.999	Tight	CSTCE_G_C	CSTNE_G_C
	14.000 - 20.000	Standard	CSTCE_V_C	CSTNE_V_C
		Standard	CSTCE_V_A	CSTNE_V_C
		Tight	CSTCE_V_C	CSTNE_V_C
	16.000, 20.000, 24.000	Tight	-	CSTNE_V_T
Consumer and Industrial	4.000 - 7.999	Standard	CSTCR_G ^*2
	4.000 - 7.999	Tight	CSTCR_G_L	CSTNR_G_L
	8.000 - 13.999	Standard	CSTCE_G	CSTNE_G
	8.000 - 13.999	Tight	CSTCE_G_L	CSTNE_G_L
	14.000 - 20.000	Standard	CSTCE_V	CSTNE_V
	14.000 - 20.000	Tight	CSTCE_V_L	CSTNE_V_L

*1) Standard tolerance: 萝莉影视with ±0.5% initial tolerance.
Tight tolerance: 萝莉影视with ±0.1% max. initial tolerance.

*2) Palladium has never been used.

Subject	Item		Previous Products	Base Metal Electrode products		Reference Link
All Series	Part Number		CSTCxxx	CSTNxxx		Part Numbering
	Material
		Layer Electrode in substrate	PdNi
		Outer Electrode	Ag	Cu
	Electrical , Physical , Environmental Characteristics					Comparison
	Appearance , Dimensions
Tight Frequency Tolerance	Frequency Tolerance		0.1%		±0.07%
Standard Frequency Tolerance	Frequency Tolerance
Consumer , Tight Frequency Tolerance	Operating Temperature Range		0 to +70℃		-40 to +85℃ OR -20 to +85℃
Consumer , Standard Frequency Tolerance			-20 to +80℃		-40 to +85℃
Automotive
4.000 - 7.999MHz	Land Pattern
8.000 - 13.999MHz
14.000 - 20.000MHz			Partial change：Electrode pattern reconfiguration

*1) Standard tolerance: 萝莉影视with ±0.5% initial tolerance.
Tight tolerance: 萝莉影视with ±0.1% max. initial tolerance.

Data Sheet (Reference Spec)
Comparison drawings against previous products

Related material of environment RoHS/Reach Certificate of Compliance
Other Documents MSL (Moisture Sensitivity Level)

: AThis is to prevent potential supply risks and price increases, by changing the material from the precious metal palladium to nickel.
: AIt is not necessary. However, when changing the IC and or board layout, we recommend another IC matching evaluation be conducted.
: AIt is not necessary unless the previous product falls under the CSCTE_V or CSTCE_V_A series. See below for changes.

Frequency(MHz)	Tolerance Type	Conventional Products		Base Metal Electrode products
4.000 - 7.999	Tight	CSTCR_G_C CSTCR_G_L	A	CSTNR_G_C CSTNR_G_L	A
8.000 - 13.999	Standard	CSTCE_G_A CSTCE_G	B	CSTNE_G_A CSTNE_G	B
8.000 - 13.999	Tight	CSTCE_G_C CSTCE_G_L	B	CSTNE_G_C CSTNE_G_L
14.000 - 20.000	Standard	CSTCE_V	C	CSTNE_V
		CSTCE_V_A	C	CSTNE_V_C
		CSTCE_V_C	B	CSTNE_V_C
	Tight	CSTCE_V_C CSTCE_V_L	B	CSTNE_V_C CSTNE_V_L